Wanting to Paint? Here’s How You Do It

What You’ll Need

Much like most jobs, it’s a good idea to prepare things ahead of time so that you know what you’re doing when it comes time to do the job. Painting is no different. For one, it’s recommended to have a tool station prepared. A tool station is a small area that you can work in where all your painting related material will be within arm’s reach. Most paint jobs require a bit of endurance when working on them. In addition to all these things you should also think about getting latex gloves, a mask to cover your nose and mouth and clothes that you don’t mind getting paint on.

At the Start

Pick a day of the week where you don’t have anything planned. This will be the day that you can go and pick out the paint colors and get advice for what kind of paint you will need for the job. It’s also a good idea to get some wall tape so you can shield off the areas you don’t want to get any paint in. When you get home, clear away all the furniture in the house that could get touched by paint. Anything that’s on the wall needs to be removed. Use drop cloths on anything else that is too heavy to move. Cover everything with as much plastic as you have.

Paint, Paint, Paint!

Now you can finally paint. Pop the paint can lid, apply a gentle amount of paint to the brush and get to work stroking the paint in a fluid, single motion. Take your time when painting. Let it come naturally. After a few minutes take some time to consider the following (the list has been given by the painters Brisbane Northside):

  • Do you have enough paint left to finish the job?
  • Is the dry part giving off the correct color tone?
  • How many days do you have to paint?
  • What sections of the room require the most paint?

It might seem a bit extreme, but you’re going to be grateful afterwards when you have a plan for how you’re going to go through the next steps towards painting the room. If you feel up to it you can even clean up the hardware before putting them back on the wall. By doing this you’ll be killing two birds with one stone to make the room look better than ever before. Just try to remember where everything goes!

Finishing Up

Not all walls are going to be smooth and ready for painting. Sometimes a wall will have a large hole or there could be a crack caused by years of use. These should be fixed before any proper painting can begin. Any local hardware store will direct you with what you need to fix the wall. One quick solution is to use fiberglass tape or spackle to fill holes of various sizes. Once it’s fixed properly, then you can start to work on painting the area. Use caution when working on these recently repaired walls.

Categorized as News

Leave a comment

Your email address will not be published. Required fields are marked *